Features:
1. Flybarless, simple 4-channel design, using 6-axis gyroscope, with air pressure altitude setting, optical flow positioning functions, using aerodynamic principles to design blades to provide strong power and body self-stability. One-key take-off and one-key landing functions make the product easier to operate and more suitable for novices.
2. Use 050 carbon brush motor with heat sink protection to make the motor last longer. Standard 7.4v 600mah 25c high-rate battery with USB charging plug. The battery life can reach about 16 minutes
3. 4-channel remote control, low voltage alarm, large and small rudder conversion and other functions. In particular, there is an aircraft hovering debugging mode, and entering the debugging mode can adjust the aircraft to the best state.
4. The remote control can be freely switched between left and right hands, and the indoor optical flow positioning mode can be switched. For optical flow positioning, it is recommended to fly in an environment with strong light, clear lines, and low wind. The best effect is to keep the height at about 1.5 meters. Strong, transparent, unclear lines, disordered lines, and flying on water will affect the positioning effect.
5. The tail motor is connected by a detachable plug, which is convenient for customers to replace.
6. The remote control adopts an independent locator rocker seat, which has a better and more delicate hand feel and more accurate centering.
7. The flight control system adds two receiver conversion sockets, 5V is suitable for FUTABA (S-BUS) and other receivers with (S-BUS) ports, and 3V is suitable for DSM receivers.
Specification:
Brand: Wltoys
Model: K200
Material: Nylon + Engineering Materials
Length: 300mm
Flying Weight: 125g
Flight time: about 17 minutes
Charging time: 90 minutes
Remote control mode: 2.4G remote control
Remote control distance: about 80-100 meters
Motor: Main motor*1 (carbon brush) 050 Tail motor*1 (hollow cup) 1020
Battery: 7.4V 600mAh 25C *1
Package included:
Aircraft*1
Remote control*1,
Manual*1,
USB Charger*1,
Main propeller*2,
Tail wind blade*1
Lithium battery*1
Hex Screwdriver*1
Phillips screwdriver*1
